Anne Vogt Jewelry
fine handcrafted sterling silver jewelry featuring
rare and unusual gemstones
SIMPLE BEZEL DESIGN
This earring or pendant design uses 2 hollow
tubes.  A larger stone is set at the bottom, and
an accent stone above the tubes may or may
not be added.  The chain may slide through
either tube.  This design will not work with
most neck rings or omegas because of the
diameter of the tube.
FRAMED DESIGNS
Designs
This pendant design uses a larger stone under
the curved tube with a smaller accent stone
above it.  The chain slides through the tube.  
This design will not work with most neck rings
or omegas because of the diameter and curve
of the tube.
TWO-TUBE DESIGNS
CURVED TUBE DESIGNS
This design consists of a strip of silver bezel
(which holds the stone) soldered to a silver
backing.  Earrings have either a post or French
hooks.  Hooks are usually made with a locking
clasp on the back, but can be ordered as just a
hook.  Rubber "stoppers" will be provided for
the unlocking style.  Pendants may have a
jump ring or may be soldered directly to the
bezel.
This design is like the SIMPLE BEZEL DESIGN
except there is an "edge" or frame of extra
silver around the bezel.  Earrings can be made
either with posts or French hook designs.  
Specify "locked clasp" or "unlocked with
rubber stoppers".  Pendants are made with a
jump ring and a bail.  See BAIL options later on
the page.
This pendant design uses a larger stone below
crossing sterling curved pieced.  A smaller
accent stone sits above the silver accents.  
Either a jump ring or directly soldered  bail is
attached for the chain.
This pendant design uses a larger stone under
the curved tube with a smaller accent stone
above it.  The chain slides through the tube.  
This design will not work with most neck rings
or omegas because of the diameter and curve
of the tube.
ASIAN DESIGN
CROSSED TUBING DESIGN
Round silver wire is arched to create a soft
design.  Smaller accent stones sit above the
arch, while a larger stone is used for the
bottom part.
A chemical is used to oxidize the metal,
creating a soft multi-color or darkened finish.  
Accent pieces of either silver, brass, gold, or
copper can be soldered to the silver to create
interesting  designs.  Textured silver sheet and
square hollow tubing can also be used to
create the settings.
ARCHED DESIGN
OXIDIZED DESIGN
A variety of designs are available in one of a kind
pieces.  Some examples are pictured here.  Rarer
and more unusual stones are often used and are
accented with other smaller stones.  Designs
include textured backgrounds with 14K gold
accents, multiple very unusual stone combinations,
and neck pieces using a striking variety of accents
and rare stones.
Simple, elegant or casual, and affordable.  All
beads, headpins and ear-wires are solid
sterling silver.  The more elaborate filigree
beads are individually hand-made by
silversmiths in Bali.  Check the "What's For
Sale"  section.  Lever-back ear-wires are
available.
ONE OF A KIND DESIGNS
BEADED EARRINGS
An assortment of sterling silver bails are
available.  Some are soldered directly to the
setting, while others need a jump ring.  For
example, framed designs where there is a flat,
thin edge of silver.
BAILS
Stone chipbeads or smaller beads are strung onto
silver creating a lightweight, more affordable
design.
BEADED EARRING SHAPES
Stone chip or small beads are strung through the
silver setting.  Jump rings are soldered for
security.
BEADED PENDANTS
Fancy silver accent wire creates an elegant but
simple design.  A wide variety of smaller stones
can be used in this design.
SILVER WITH SCALLOPED ACCENTS
Stone chip beads or smaller beads are strung
horizontally across the earring.  This lightweight,
comfortable design works best with posts.
SILVER BEADED WAVE EARRINGS
This multi-stone design incorporates an accent
stone above the swirl of silver, with a larger
stone piece below.  Accent stones vary
depending on colors in the larger focal piece.
SWIRL DESIGN